LG Refrigerator Model LSXS26326S Manual

The LG LSXS26326S is a 26 cubic foot French Door Refrigerator with InstaView Door-in-Door, Smart Cooling Plus technology, linear compressor, dual ice makers (Craft Ice and Door Ice+), SmartThinQ connectivity, and fingerprint-resistant stainless steel finish. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using InstaView & Door-in-Door 7. Ice & Water Systems 8. SmartThinQ App 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: French Door design with InstaView panel, Craft Ice maker, Door Ice+ system, linear compressor, Smart Cooling Plus, SmartThinQ connectivity.

FeatureDescription
InstaView Door-in-DoorKnock twice to see inside; quick access compartment
Linear CompressorEnergy efficient with 10-year warranty
Craft Ice MakerMakes slow-melting spherical ice
Door Ice+Additional ice production in the freezer door
Smart Cooling PlusMulti-air flow and humidity control
SmartThinQWi-Fi enabled for remote control and monitoring
Fresh Air FilterReduces odors in the refrigerator
Convertible DrawerAdjustable temperature for fridge/freezer
Door AlarmAlerts if door is left open
Energy Star CertifiedMeets energy efficiency guidelines

Installation

Unpack and inspect contents. Allow to stand upright for 2 hours before powering on.

  1. Position refrigerator: Place on level floor with 2-inch clearance at back and sides.
  2. Connect water line: For ice/water dispenser, connect to cold water supply (1/4" copper or plastic tubing).
  3. Power connection: Plug into dedicated 115V, 60Hz, 15A grounded outlet.
  4. Level the unit: Adjust front leveling legs for stability and proper door closure.

WARNING! Refrigerator is heavy; use two people for moving. Ensure water line connections are tight to prevent leaks.

First-Time Setup

After installation, follow initial setup steps.

  1. Power on: Plug in and press POWER button on control panel.
  2. Set temperature: Default is 37°F for fridge, 0°F for freezer. Adjust using controls.
  3. Enable InstaView: Knock twice on the panel to activate; ensure lighting is functional.
  4. Connect to SmartThinQ: Download app and follow pairing instructions.
  5. Run ice maker: Discard first 24 hours of ice production.

CAUTION! Do not load food until refrigerator reaches set temperatures (approximately 24 hours).

Specifications

Controls and Settings

Control panel located on refrigerator door. Main functions: Temperature, Ice Type, Door Alarm, SmartThinQ, Lock.

Temperature Settings: Fridge (34-46°F), Freezer (-6 to 6°F), Convertible Drawer (fridge/freezer).

Ice Options: Select between Craft Ice (spherical) or crushed/cubed from Door Ice+.

Special Modes: Express Freeze, Express Cool for rapid temperature changes.

Filter Reset: Press and hold Ice Type + Light for 3 seconds after filter replacement.

Using InstaView & Door-in-Door

The InstaView panel provides quick access without opening the main door.

  1. Activate: Knock twice on the glass panel; interior light turns on for 5 seconds.
  2. Access Door-in-Door: Press the handle release to open the quick access compartment.
  3. Organize: Store frequently used items like beverages, snacks, condiments.
  4. Close: Ensure door is fully closed until it clicks.

Tip: Keep the glass panel clean for proper sensor detection.

Ice & Water Systems

Dual ice making systems for different ice needs.

  1. Craft Ice: Makes 8 spherical ice balls per cycle (slow-melting for beverages).
  2. Door Ice+: Produces up to 4.2 lbs of ice per day (cubed or crushed).
  3. Water Dispenser: Press lever for chilled water (requires filter).
  4. Filter Replacement: Replace LT1000P filter every 6 months or 300 gallons.
  5. Cleaning Cycle: Run cleaning cycle every 6 months (hold Ice Type + Water for 3 seconds).

WARNING! Do not use with non-potable water. First ice batch may be discolored—discard.

SmartThinQ App

Connect refrigerator to Wi-Fi for smart features.

Features: Remote temperature adjustment, ice maker control, filter status monitoring, energy usage tracking, diagnostic checks, vacation mode.

Setup: Download SmartThinQ app > Create account > Add device > Follow on-screen instructions.

Care & Cleaning

Unplug before cleaning interior. Use mild detergent and warm water; avoid abrasives.

  1. Exterior: Wipe with damp cloth; use stainless steel cleaner for fingerprints.
  2. Interior: Remove shelves/drawers; clean with baking soda solution (2 tbsp per quart water).
  3. Condenser coils: Vacuum every 6-12 months (located at back or bottom front).
  4. Door seals: Wipe with clean water to maintain seal.

CAUTION! Do not use sharp objects to remove ice. Never use hot water on frozen surfaces.

Regulatory Information

UL Listed. FCC Part 15 Class B digital device. Energy Star Partner. California Proposition 65 Warning. Manufactured for LG Electronics USA, Inc. For support, visit www.lg.com or contact 1-800-243-0000. Serial number located on interior wall.

Troubleshooting

SymptomPossible CauseCorrective Action
Refrigerator not coolingPower/doorsCheck power connection; ensure doors fully closed; allow 24 hours for initial cool down.
Ice maker not workingWater supply/filterEnsure water line connected and on; check filter installation; wait 24 hours after installation.
Water dispenser slowFilter/water pressureReplace water filter; check household water pressure (minimum 20 psi).
InstaView not lightingSensor/powerClean glass surface; check refrigerator power; ensure no obstructions.
Unusual noiseLeveling/ice makerLevel refrigerator; ice maker sounds are normal during cycle.
Error codes on displaySystem faultRefer to manual code list; power cycle; call service if persistent.

Reset: Unplug for 1 minute to reset control board.

Service: 1-800-243-0000; www.lg.com

LG Refrigerator Model LSXS26326S Manual © - All Rights Reserved 2025