LG Model LFXS26596S Parts Manual

The LG Model LFXS26596S is a French Door Refrigerator with 26 cubic feet capacity, featuring Door-in-Door design, InstaView Door, Linear Cooling, Smart Cooling Plus, Smart Diagnosis, and Craft Ice Maker. This manual provides detailed parts identification, diagrams, ordering information, and maintenance guidance for authorized service technicians and qualified personnel.

1. Safety Information 2. Model Overview & Specifications 3. Exploded View Diagrams 4. Parts List & Numbers 5. Door & Gasket Assembly 6. Cooling System Components 7. Ice & Water System 8. Electrical Components 9. Control Panel & Display 10. Installation & Replacement Notes 11. Troubleshooting Guide

Safety Information

Before servicing, disconnect power. Use proper tools and follow electrostatic discharge (ESD) precautions. Refrigerant system should only be serviced by EPA-certified technicians.

WarningDescription
Electrical HazardDisconnect power before accessing internal components
RefrigerantR-600a (Isobutane) - Flammable. No open flames. Ventilate area.
Sharp EdgesWear protective gloves when handling metal parts
Heavy PartsUse proper lifting techniques; two-person lift recommended
ESD ProtectionUse grounded wrist strap when handling electronic boards

Model Overview & Specifications

Key features and technical specifications of the LFXS26596S refrigerator.

Exploded View Diagrams

Reference diagrams showing component relationships and assembly order.

  1. Cabinet Assembly: Main structure, insulation, liner.
  2. Door Assembly: Left/right refrigerator doors, Door-in-Door, hinges, gaskets.
  3. Freezer Assembly: Drawer, basket, evaporator cover.
  4. Mechanical Compartment: Compressor, condenser, fan assembly.
  5. Interior Components: Shelves, bins, crispers, light covers.

NOTE: Diagrams are numbered corresponding to parts list. Refer to section 4 for part numbers.

Parts List & Numbers

Complete parts listing with LG part numbers for ordering.

Part DescriptionPart NumberQty
Main Control BoardMCL738295041
Display Board (InstaView)6871JQ2002B1
Compressor (Linear)AJQ734075011
Evaporator Fan Motor6327FR2006A1
Condenser Fan Motor6327FR2005B1
Door Gasket (Left Refrigerator)MCE738797011
Door Gasket (Right Refrigerator)MCE738797021
Craft Ice Maker AssemblyMCS738297031
Water Filter HousingMCS738295071
Door Hinge Kit (Upper)MCS738796041 set
Light Bulb (LED)6875FR1001A3
Door Shelf (Door-in-Door)ADQ734076031

Door & Gasket Assembly

Components related to refrigerator doors, hinges, and seals.

  1. Door Removal: Remove hinge cover, loosen hinge bolts, lift door off.
  2. Gasket Replacement: Remove retainer screws, pull gasket from channel, install new gasket.
  3. Hinge Adjustment: Adjust height and alignment with provided shims.
  4. Door-in-Door Assembly: Separate inner door panel, replace latch mechanism if needed.

WARNING! Doors are heavy (approx. 45 lbs each). Use proper support during removal.

Cooling System Components

Refrigeration circuit parts including compressor, evaporator, and fans.

CAUTION! R-600a is flammable. Follow EPA recovery procedures.

Ice & Water System

Craft Ice Maker and water dispensing components.

ComponentFunctionPart Number
Craft Ice MakerMakes spherical ice ballsMCS73829703
Water Valve AssemblyControls water flow to dispenser/ice makerMCS73829508
Water Filter HousingHolds LT1000P filterMCS73829507
Dispenser SwitchActivates water/ice dispensing6871JQ2003A
Water Line Connector1/4" quick connect fittingMCS73829511

Electrical Components

Wiring, boards, sensors, and connectors.

  1. Main Control Board: Located rear top. Manages all functions.
  2. Display Board: Behind InstaView panel. Touch controls.
  3. Temperature Sensors: 4-wire thermistors. Resistance varies with temperature.
  4. Door Switch: Magnetic reed switch for light control.
  5. Wiring Harness: Color-coded connectors. Check for pinched wires.

Tip: Use Smart Diagnosis feature via LG app for error code retrieval.

Control Panel & Display

InstaView and external control interface parts.

NOTE: Display is sensitive to static. Handle with ESD protection.

Installation & Replacement Notes

Important procedures for part installation and replacement.

  1. Compressor Replacement: Recover refrigerant, replace filter drier, evacuate to 500 microns, charge with 2.2 oz R-600a.
  2. Door Alignment: Adjust hinges with 4mm hex key. Ensure even gap (3-5mm).
  3. Ice Maker Test: After replacement, run 3 ice-making cycles to verify operation.
  4. Leak Check: Use nitrogen at 150 PSI and soap solution. Repair any leaks before charging.

WARNING! Always replace filter drier when opening refrigerant system.

Troubleshooting Guide

Common issues and part-related solutions.

SymptomPossible Faulty PartCorrective Action
Not coolingCompressor, fan motor, control boardCheck voltage to compressor; replace if open winding.
Ice maker not workingWater valve, ice maker assemblyTest water valve solenoid; replace ice maker if motor fails.
Display blankDisplay board, main control boardCheck 12V DC to display; replace board if no power.
Water leakingWater line, filter housing, drain panInspect connections; replace cracked housing.
Door not sealingGasket, hinge alignmentReplace worn gasket; realign door.
Unusual noiseFan motor, compressor mountsReplace noisy fan; tighten compressor bolts.

Smart Diagnosis: Hold "Ice Type" + "Light" for 3 seconds to enter diagnostic mode.

Service Support: 1-800-243-0000; www.lg.com/us/support

LG Model LFXS26596S Parts Manual © - All Rights Reserved 2025