lg lmxs30776s 2 manual

The LG LMXS30776S 2 is a 30-inch front-loading washing machine with advanced TurboWash™ technology, 5.2 cu. ft. capacity, 6Motion™ technology (Rolling, Stepping, Scrubbing, Swing, Filtration, Tumbling), SmartThinQ® connectivity, AI Direct Drive™ motor, Steam™ function, ColdWash™ option, and NFC Tag On for easy settings access. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to SmartThinQ 7. Using Wash Cycles 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Front-loading drum, Control Panel with LCD display, Detergent/Softener Dispenser, AI Direct Drive™ Motor, Water Inlet Valves, Drain Pump, NFC Tag On sticker.

Feature	Description
TurboWash™ 360°	Reduces wash time by up to 30 minutes
6Motion™ Technology	Six different wash motions for optimal fabric care
SmartThinQ®	Wi-Fi enabled for remote control and diagnostics
AI Direct Drive™	Motor with 10-year warranty; senses load and adjusts
Steam™ Function	Reduces wrinkles and allergens; sanitizes
ColdWash™	Effective cleaning with cold water to save energy
NFC Tag On	Tap NFC-enabled phone to download cycles/settings
Allergiene™ Cycle	Uses steam to reduce common allergens
Delay Start	Set wash cycle to finish at a later time
Child Lock	Locks control panel to prevent accidental changes

Installation

Unpack and inspect contents. Place on a level, solid floor.

Remove shipping bolts: Use wrench to remove four bolts from rear; keep for future moves.
Connect water supply: Attach hot and cold hoses to corresponding faucets (red for hot, blue for cold).
Connect drain hose: Insert into standpipe or laundry sink; secure with hose clip.
Level the machine: Adjust front leveling feet; use bubble level to ensure machine is even.
Plug into dedicated 120V AC outlet.

WARNING! Do not remove shipping bolts before moving to final location. Ensure water connections are tight to prevent leaks.

First-Time Setup

Plug in and power on the washer; follow initial setup prompts.

Run initial cleaning cycle: Select Tub Clean cycle and run without laundry.
Connect to SmartThinQ: Download app, follow in-app instructions to connect washer to Wi-Fi.
Set preferences: Configure default temperature, spin speed, and notification settings.
Test a cycle: Run a quick wash cycle to ensure proper operation.

CAUTION! Ensure machine is level to prevent excessive vibration and noise during spin cycles.

Specifications

Capacity: 5.2 cubic feet.
Dimensions (HxWxD): 39" x 27" x 33".
Motor: AI Direct Drive™ with inverter technology.
Water Connections: Hot & Cold inlet.
Voltage: 120V AC, 60Hz.
Max Spin Speed: 1300 RPM.
Energy Star® Certified: Yes.
Noise Level: Less than 65 dBA during wash.
Weight: 205 lbs.

Controls and Settings

Access settings via the control knob and touch buttons. Display shows cycle time, settings, and status.

Control Panel: POWER, START/PAUSE, CONTROL KNOB (select cycles), OPTION buttons (Temp, Spin, Soil Level, Steam), SMART DIAGNOSIS, CHILD LOCK.

Cycles: Normal, Heavy Duty, Delicates, Bedding, Towels, Speed Wash, Tub Clean, Allergiene, Steam Fresh, Cold Wash. Options: Temperature (Cold, Tap Cold, 30°C-90°C), Spin Speed (No Spin, 400-1300 RPM), Soil Level (Light, Normal, Heavy), Steam (On/Off). Settings: Sound (On/Off), End of Cycle Signal, Default Settings, Factory Reset.

Connecting to SmartThinQ

Enables remote control, cycle monitoring, and diagnostics.

Download LG SmartThinQ app from App Store or Google Play.
Create an account or log in.
Press and hold SMART DIAGNOSIS button on washer for 3 seconds.
Follow in-app instructions to connect washer to your home Wi-Fi network.
Once connected, control cycles, download additional cycles, and receive notifications.

Tip: Ensure your smartphone is connected to the same 2.4 GHz Wi-Fi network during setup.

Using Wash Cycles

Supports a wide variety of fabrics and soil levels.

Load laundry: Open door, load items loosely without overfilling.
Add detergent: Pour into main wash compartment of dispenser. Add softener to designated compartment.
Select cycle: Turn knob to desired cycle (e.g., Normal, Heavy Duty).
Adjust options: Press Temp, Spin, Soil Level, or Steam buttons to customize.
Start: Press START/PAUSE. The door will lock and cycle will begin.
Pause/Add item: Press START/PAUSE to pause; door unlocks after a short delay to add forgotten items.
End of cycle: Signal sounds; door unlocks. Remove laundry promptly.

WARNING! Do not wash items soaked in gasoline or other flammable substances. Keep fingers away from door seal area during operation.

Care & Maintenance

Unplug before cleaning. Wipe exterior with soft, damp cloth. Clean detergent dispenser monthly. Run Tub Clean cycle monthly or as prompted.

CAUTION! Do not use abrasive cleaners or scouring pads. Clean the door seal and glass regularly to prevent mold/mildew.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 LG Electronics Inc. All rights reserved. For support, visit www.lg.com or contact LG Customer Service at 1-800-243-0000.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Door not closed/power	Ensure door is firmly closed; check power outlet and cord connection.
No water filling	Water supply/valves	Check water faucets are on; ensure inlet hoses are not kinked.
Excessive vibration/noise	Leveling/shipping bolts	Ensure machine is level; verify shipping bolts are removed.
Error code displayed	Various faults	Refer to error code list in manual; use Smart Diagnosis via app.
Poor cleaning results	Detergent/loading	Use HE detergent; do not overload; select correct cycle/soil level.
Drain issue	Drain hose/clog	Check drain hose for kinks or clogs; clean pump filter if needed.

Smart Diagnosis: Use the SmartThinQ app or press and hold SMART DIAGNOSIS button for 3 seconds, then call support with the audio signal.

Service: 1-800-243-0000; www.lg.com