Frigidaire Dishwasher LFBD2409LF Manual

The Frigidaire LFBD2409LF is a 24-inch built-in dishwasher featuring multiple wash cycles, energy-saving options, adjustable racks, soil sensors, quiet operation, and stainless steel interior. It includes standard wash cycles (Normal, Heavy, Light, Rinse Only), delay start, heated dry, sanitize option, and child lock. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading and Rack Adjustment 7. Using Wash Cycles 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control Panel, Upper and Lower Racks, Silverware Basket, Filter System, Detergent Dispenser, Rinse Aid Dispenser, Drain Pump.

Feature	Description
Control Panel	Touch controls with cycle selection and options
Upper Rack	Adjustable for taller items; fold-down tines
Lower Rack	Heavy-duty for pots and pans; adjustable tines
Silverware Basket	Removable; fits in upper or lower rack
Filter System	Self-cleaning filter; easy maintenance
Detergent Dispenser	Dual-compartment for pre-wash and main wash
Rinse Aid Dispenser	Adjustable for better drying
Soil Sensor	Automatically adjusts wash time based on soil level
Heated Dry	Optional heated drying cycle
Delay Start	Program start time up to 24 hours

Installation

Unpack and inspect contents. Ensure proper electrical and plumbing connections.

Position dishwasher: Slide into cabinet opening; level using adjustable feet.
Connect water supply: Attach hot water line (120°F recommended) to inlet valve.
Connect drain hose: Use air gap or high-loop installation per local codes.
Electrical connection: Hardwire to 120V, 15-amp circuit; ensure proper grounding.
Secure to counter: Use mounting brackets to secure top of dishwasher to counter.

WARNING! Installation must comply with local codes. Disconnect power before installation.

First-Time Setup

Before first use, run a rinse cycle to clean interior.

Remove shipping materials: Check interior for foam blocks or tape.
Load rinse aid: Fill rinse aid dispenser; adjust setting based on water hardness.
Select cycle: Choose NORMAL cycle without dishes to flush system.
Add detergent: Use recommended dishwasher detergent; avoid hand soap.
Start cycle: Close door and press START; allow cycle to complete.

CAUTION! Use only dishwasher detergents; hand soaps can cause suds overflow.

Specifications

Type: Built-in 24-inch dishwasher.
Capacity: 14 place settings.
Wash Cycles: Normal, Heavy, Light, Rinse Only, Sanitize.
Options: Heated Dry, Delay Start, Child Lock.
Noise Level: Quiet operation (approx. 52 dBA).
Interior: Stainless steel tub and door liner.
Water Consumption: Varies by cycle; approx. 3-6 gallons per cycle.
Power Source: 120V AC, 60Hz, 15-amp circuit.
Water Pressure: 20-120 psi required.
Warranty: 1-year limited parts and labor.

Controls and Settings

Control Panel: Cycle buttons (NORMAL, HEAVY, LIGHT, RINSE ONLY), Options (HEATED DRY, DELAY START, CHILD LOCK), START/RESET.

Cycle Descriptions: NORMAL for daily loads; HEAVY for pots/pans; LIGHT for lightly soiled; RINSE ONLY for rinsing without detergent; SANITIZE uses high temp for bacteria reduction.

Options: HEATED DRY improves drying; DELAY START sets start time (1-24 hrs); CHILD LOCK disables controls during cycle. Settings: Rinse aid dispenser adjustable (1-6); soil sensor auto-adjusts wash time.

Loading and Rack Adjustment

Proper loading ensures optimal cleaning.

Scrape food: Remove large food particles before loading.
Upper rack: Adjust height by lifting levers; fold tines for glasses.
Lower rack: Adjust tines for pots/pans; load facing center.
Silverware: Place in basket with handles down; mix utensils.
Detergent: Use recommended amount; fill both compartments for heavy soil.

Tip: Avoid blocking spray arms; ensure items are dishwasher-safe.

Using Wash Cycles

Select cycle based on soil level and load type.

Load dishes: Arrange per loading guidelines.
Add detergent: Fill dispenser; close lid until cycle starts.
Select cycle: Press desired cycle button (NORMAL, HEAVY, etc.).
Add options: Press HEATED DRY or DELAY START if desired.
Start: Close door firmly; press START; cycle begins.
Pause: Open door during cycle to add item; close to resume.
Cancel: Press and hold START/RESET for 3 seconds to cancel cycle.

WARNING! Do not open door during high-temperature cycles; steam may cause burns.

Care & Maintenance

Regular maintenance ensures performance and longevity.

Clean filter: Remove lower rack; twist and lift filter; rinse under water monthly.
Check spray arms: Ensure holes are clear; remove debris.
Wipe door gasket: Clean with damp cloth; check for leaks.
Run cleaning cycle: Monthly, use dishwasher cleaner or vinegar.
Inspect drain hose: Ensure no kinks or clogs.

CAUTION! Unplug or disconnect power before maintenance. Do not use abrasive cleaners.

Regulatory Information

UL listed; meets NSF/ANSI 184 for residential dishwashers. Energy Star certified for energy efficiency. Copyright © Frigidaire; trademarks of Electrolux Home Products, Inc. For support, visit www.frigidaire.com or contact 1-800-374-4432.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Power/door	Check circuit breaker; ensure door closed securely; child lock on.
Poor cleaning	Spray arms/detergent	Clear spray arm holes; use correct detergent amount; check water temperature.
Water not draining	Drain hose/filter	Check for kinks; clean filter; ensure air gap clear.
Leaking water	Door seal/connections	Inspect door gasket; tighten water connections; level dishwasher.
Unusual noise	Spray arm/foreign object	Check for items touching spray arm; remove debris from pump.
Detergent not dispensing	Dispenser lid/cycle	Ensure dispenser lid closes; check cycle selection.

Reset: Unplug for 1 minute or turn off circuit breaker to reset control.

Service: 1-800-374-4432; www.frigidaire.com